Winch Accessories

The Carbon Offroad Mega Pro Winch Hook is the latest product from the design team at Carbon Offroad. Completely designed, engineered, FEA tested and finished in house by our team, we put all of our collective knowledge and experience together to build a simple, functional and cost effective winch hook which was specifically designed for winching activities.  This is not a hook that is out of the parts bin from the local lifting and rigging supplier, this hook is completely 100% made from scratch by our local design team and overseas manufacturing facility. We did the design, 3d printed the prototypes, tested form, function, fit and usage, FEA process to make the hook as strong as it could be while removing material where it wasn't required.  The I-beam hook construction is unique to the Mega Pro Hook. We cast the alloy gate to make it lightweight and durable. The hook is manufactured by a forging and heat treating process using 40cr material. This material is cost effective, easy to work with and responds well in forging and heat treatment processes. What results is an almost indestructible hook that will last a lifetime. We also then process the finish in a durable powdercoating process, similar to the process that your exterior aluminum windows in your house go through, this process is known for long term resistance to UV degradation and protection of the base material.  This hook can be stowed against the fairlead either flat on both side or on it's end, hook gate up, this gives you the ability to snap on a soft shackle or tree protector loop once handed and walk the rope out to the anchor point.  The mounting pin is a complete through pin design which is externally secured by a circlip making it simple and easy to mount to your winch rope.  We really tried hard here to make this hook to the highest standard at the best price possible so that you and your mates can access good gear for reasonable prices. We did this by committing to a proper design, development and manufacturing process that allows us to keep costs down and get product on the shelf in good quantities.  The hook is safe to use on any winch up to 20000lb.  The rubber pads on the hook are a press to fit arrangement. They have been designed to be removable so that once you have installed the hook, you can arange the logos in a fashion that suits your particular setup. Once in place you can use some rubber cement glue to permanently secure them.   This product is an Australian Registered Design under design number 202116716.  

A complete 12V winch accessory and control kit from Carbon Offroad. Includes sealed control box with integrated solenoid, wired and wireless remotes, and a multi-fit CNC aluminum fairlead. Fast Facts Complete 12V winch accessory and control kit Control box with integrated 600 amp solenoid Includes wired and wireless winch remotes Multi-fit CNC aluminum fairlead included Suits most 12V electric winches Description The Carbon Offroad Winch Accessory Kit 12V is designed for setting up or replacing essential winch control components on a 12V electric winch. The kit includes a sealed control box with integrated 600 amp solenoid, built to handle off-road conditions and common mounting configurations. Supplied cables and hardware allow for straightforward installation on most compatible winches. Winch control is handled via both wired and wireless remotes. Use the wired remote when working close to the drum, or the wireless remote when you need flexibility during positioning and recovery. A multi-fit CNC aluminum fairlead is included, supporting both standard and offset mounting positions to suit a wide range of winch mounts. Winch Accessory Kit Features 12V sealed winch control box Integrated 600 amp solenoid Wired remote for direct winch control Wireless remote for flexible operation Multi-fit CNC aluminum fairlead Supports standard and offset rope mounting What’s Included 1 x 12V winch control box with integrated 600 amp solenoid 1 x Wired winch remote 1 x Wireless winch remote 1 x Multi-fit CNC aluminum fairlead Battery and control cables Mounting hardware Carbon Offroad keyring Specifications Voltage: 12V Control type: Wired and wireless Fairlead material: CNC aluminum Compatibility: Most 12V electric winches

Carbon Offroad Tow Hitch Winch Mounting Cradle Turn your winch into a fully portable recovery tool with this 2-inch (50 mm) tow hitch mount. Perfect for those who want flexibility, it allows you to quickly move your winch between vehicles or store it when not in use. The integrated carry handles fold over the top of the winch for compact, easy storage in your garage, trailer, or truck bed. Compatible with the full Carbon Offroad ATV winch range and all standard low-mount winches except the 20,000lb model. Features & Benefits Portable convenience – easily move your winch from one vehicle to another using a standard 2-inch (50 mm) receiver hitch Quick setup – install or remove your winch in minutes, no permanent mount needed Fold-over carry handles – make lifting and storing your winch simple and space-efficient Heavy-duty construction – built to handle rugged off-road use and heavy pulling power Versatile compatibility – fits all Carbon Offroad ATV winches and all low-mount winches up to 15,000 lb, excluding the 20,000 lb model Ideal for trailers, trucks, and buggies – mount it wherever you have a 2-inch receiver for maximum recovery versatility Disclaimer: Always check your towbar’s rated capacity before use to ensure it is suitable for the weight and load of your winch and recovery operations.

A complete 24V winch accessory and control kit from Carbon Offroad. Includes sealed control box with integrated solenoid, wired and wireless remotes, and a multi-fit CNC aluminum fairlead. Fast Facts Complete 24V winch accessory and control kit Control box with integrated 600 amp solenoid Includes wired and wireless winch remotes Multi-fit CNC aluminum fairlead included Suits most 24V electric winches Description The Carbon Offroad Winch Accessory Kit 24V is designed for setting up or replacing essential winch control components on a 24V electric winch. The kit includes a sealed control box with integrated 600 amp solenoid, built to handle off-road conditions and common mounting configurations. Supplied cables and hardware allow for straightforward installation on most compatible winches. Winch control is handled via both wired and wireless remotes. Use the wired remote when working close to the drum, or the wireless remote when you need flexibility during positioning and recovery. A multi-fit CNC aluminum fairlead is included, supporting both standard and offset mounting positions to suit a wide range of winch mounts and bumpers. Winch Accessory Kit Features 24V sealed winch control box Integrated 600 amp solenoid Wired remote for direct winch control Wireless remote for flexible operation Multi-fit CNC aluminum fairlead Supports standard and offset rope mounting What’s Included 1 x 24V winch control box with integrated 600 amp solenoid 1 x Wired winch remote 1 x Wireless winch remote 1 x Multi-fit CNC aluminum fairlead Battery and control cables Mounting hardware Carbon Offroad keyring Specifications Voltage: 24V Control type: Wired and wireless Fairlead material: CNC aluminum Compatibility: Most 24V electric winches

Carbon Winches Australia – Wired Remote Plug Extension Lead for V2 and V3 Winches  Compatibility: This extension lead is specifically designed for V2 and V3 Carbon Winches. If you’re unsure about fitment, please contact us to confirm. If your control box is tucked away inside your bullbar, or you have an aftermarket bumper such as a GM Fab Bar or Rhino Bar that makes accessing the control box difficult, this wired remote plug extension makes life easier. It allows you to remotely mount the wired remote plug on your bumper or inside your engine bay for quick and hassle-free connection. This simple solution ensures you won’t struggle to plug in your wired controller when you’re out on the trail. Because when the wired remote comes out, the last thing you want is to be fumbling with it while worrying about water flooding your rig. Extension length: Approximately 57 inches (1450 mm)

Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility. Kit Includes: Battery Isolator Switch 4 x mounting bolts with nuts Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Specs: Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black

This bracket kit provides a clean and secure under-hood installation for the V2/V3 remote wired remote plug extension, compatible with the Carbon 12k V3 Winch and Scout Pro Winch range. Includes: 1 x stainless steel L-shaped bracket 2 x M4 stainless steel bolts and nylock nuts    

This 1.6mm (0.06 in) stainless steel Z-bracket is designed to securely mount the battery isolator switch included with Carbon Offroad Winch kits. The added tab creates a Z-shaped profile, offering enhanced mounting flexibility and multiple installation options to fit tight or challenging spaces in your engine bay. The switch can be mounted on either the inside or outside faces of the bracket on both sides, allowing you to customise the orientation to best suit your vehicle’s layout. With 56mm (2.2 in) hole centers, the bracket is compatible with most similar battery isolator switches available on the market. Please note: This bracket is designed for battery isolator switches with two bolts fitted diagonally to ensure proper clearance when mounted. Always install bolts diagonally to avoid fitment issues.

Carbon Winches Wireless Remote Control Kit This wireless remote control kit is a direct plug-and-play replacement for the receiver box inside the control unit. It comes with a matched remote controller for seamless operation. Designed as a direct replacement for the Carbon Scout range, 12K Carbon Winch, and our full lineup of ATV winches, this kit offers reliable wireless control to enhance your winching experience. Give the guys a call to ensure fitment with your version of the winch.

Carbon Winches Wireless Remote Control Kit This wireless remote control kit is a direct plug-and-play replacement for the receiver box inside the control unit. It comes with a matched remote controller for seamless operation. Designed as a direct replacement for the Carbon Scout range, 12K Carbon Winch, and our full lineup of ATV winches, this kit offers reliable wireless control to enhance your winching experience. Give the guys a call to ensure fitment with your version of the winch.