The Carbon 6K packs serious pulling performance into a compact frame, delivering 6,000lb (2,725kg) of capacity with a powerful 2.5HP motor. Perfect for ATVs, UTVs, and light 4x4s tackling farm work, tight forest trails, or deep mud, it’s built for dependable recovery in challenging conditions. 6,000lb (2,725kg) Rated Pull – Serious recovery for ATVs, UTVs, and light 4x4s 2.5HP Motor – Delivers dependable torque in a compact design 147:1 Gear Ratio – Balanced for strength and control 52.5ft (16m) Synthetic Rope – Lightweight, high-strength UHMWPE Mounting Bolt Pattern – 6.46in x 2.99in (164mm x 76mm) Drum Dimensions – 2.01in x 4.80in (51mm x 122mm) Winch Dimensions – 15.16in x 4.53in x 4.69in (385mm x 115mm x 119mm) IP68 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Versatile control

Carbon Offroad Long Drum 6K is a nimble workhorse created to reach where short-drum winches can’t. With 6,000lbs of pulling capacity and a generous 26m synthetic rope on its extended drum, the Carbon CW-XD6L is engineered for versatile duty on ATVs, compact 4WDs, caravans, trailers and boats. Do you need to haul a tinny up a steep, low-tide ramp? Slide heavy machinery into a van from well outside the rear doors? Winch a small 4WD or camper-trailer through deep sand without adding an extension rope? If your jobs demand extra line reach in tight spaces, this is the winch you’ve been waiting for. With a sealed permanent-magnet motor, near-silent free-spooling clutch, dual wired + wireless remotes and fail-safe braking, the Long Drum 6K delivers reliable power, precise control and the rope length to keep work sites—and weekend getaways—running smoothly. 6,000lb (2,725kg) Rated Pull – Perfect for marine, trailer, and utility use 2.5HP Motor – Reliable, compact performance 147:1 Gear Ratio – Balanced strength and control 85ft (26m) Synthetic Rope – Extended reach for versatile recovery Mounting Bolt Pattern – 10in x 2.99in (254mm x 76mm) Drum Dimensions – 2.01in x 8.19in (51mm x 208mm) Winch Dimensions – 18.62in x 4.92in x 4.72in (473mm x 125mm x 120mm) IP68 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Multiple control options Please note this kit does not include the winch cradle in the pictures.

Built for heavier side-by-sides and utility vehicles, the ATV 4.5K offers 4,500lb capacity and a compact, rugged build. Designed for ATVs, UTVs, side-by-sides, car trailers and equipment transport; this winch is ideal for mounting in the back of a van to help load heavy equipment, and has even been used to load tinnies and open cattle gates on livestock truck trailers. 4,500lb (2,041kg) Rated Pull – Extra capacity for demanding ATV/UTV use 1.9HP Motor – Compact with reliable pulling power 176:1 Gear Ratio – Strong, controlled operation 43ft (13m) Synthetic Rope – Lightweight and durable Mounting Bolt Pattern – 6.57in x 2.99in (167mm x 76mm) Drum Dimensions – 1.26in x 2.87in (32mm x 73mm) Winch Dimensions – 14.92in x 4.72in x 4.53in (379mm x 120mm x 115mm) IP66 Rated winch and solenoid (excludes remote control and switch) Wired + Wireless Remotes – Flexible control options  12V DC PERFORMANCE SPECS (first layer of drum)   Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.) 0  20.4(6.2) 31 Amps 1/4500(2040) 1000 14.2(4.3) 65Amps 2/3750(1700) 2000 10.9(3.3) 96Amps 3/3510(1595) 3000 7.7(2.4) 125Amps 4/3300(1500) 4500 4.9(1.5) 175.Amps          

The Scout Pro 20K is built for serious recovery on heavy-duty 24V rigs. With 20,000lb of pulling capacity, a 7HP series-wound motor, and a rugged build, it’s made for oversized trailers, expedition trucks, and heavy work vehicles. Whether hauling, rescuing fully loaded 4WDs, or tackling brutal off-road conditions, this winch delivers dependable, uncompromising power. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. 20,000lb (9,072kg) Rated Pull – Maximum capacity for extreme recoveries 7HP Series-Wound Motor – Delivers high torque for confident pulling 354:1 Gear Ratio – Optimized for controlled, powerful winching 82ft (25m) Synthetic Rope – Strong, lightweight, and easy to handle Mounting Bolt Pattern – 10in x 4.5in (254mm x 114.3mm) Drum Dimensions – 3.46in x 8.82in (88mm x 224mm) Winch Dimensions – 22.8in x 7.6in x 8.8in (579mm x 192mm x 224mm) IP68 Rated – Fully sealed against dust and water Wired + Wireless Remotes – Flexible operation options Rotating Ring Gear Clutch – Quick shift between freespool and engaged modes Automatic Load-Holding Brake – Prevents rollback and overheating Winch weight with synthetic rope attached – 66.14lb (30kg) Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead – 81.6lb (37kg)

The Scout Pro 20K is built for serious recovery on heavy-duty 12V rigs. With 20,000lb of pulling capacity, a 7HP series-wound motor, and a rugged build, it’s made for oversized trailers, expedition trucks, and heavy work vehicles. Whether hauling, rescuing fully loaded 4WDs, or tackling brutal off-road conditions, this winch delivers dependable, uncompromising power. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. 20,000lb (9,072kg) Rated Pull – Maximum capacity for extreme recoveries 7HP Series-Wound Motor – Delivers high torque for confident pulling 354:1 Gear Ratio – Optimized for controlled, powerful winching 82ft (25m) Synthetic Rope – Strong, lightweight, and easy to handle Mounting Bolt Pattern – 10in x 4.5in (254mm x 114.3mm) Drum Dimensions – 3.46in x 8.82in (88mm x 224mm) Winch Dimensions – 22.8in x 7.6in x 8.8in (579mm x 192mm x 224mm) IP68 Rated – Fully sealed against dust and water Wired + Wireless Remotes – Flexible operation options Rotating Ring Gear Clutch – Quick shift between freespool and engaged modes Automatic Load-Holding Brake – Prevents rollback and overheating Winch weight with synthetic rope attached – 66.14lb (30kg) Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead – 81.6lb (37kg)

Heavy-Duty Recovery Power The Carbon Scout Pro 15K bridges the gap between standard 12K winches and truck-grade brutes. With 6804kg (15000lbs) pulling capacity, a 7HP motor, and oversized gearsets, it is built for heavily loaded overland rigs, RAM 1500s, 79 Series Land Cruisers, and slide-on camper haulers that push beyond a 12K's comfort zone. You can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Features Rated Pull: 6804kg (15000lbs) single-line, ideal for RAM 1500, 79 Series, Land Cruiser wagons, and heavy overland rigs. Motor: 12V DC 7HP series-wound motor (24V option available) provides dependable torque for heavy pulls. Gear Train: 3-stage planetary with a 218:1 gear ratio, balanced for strength and line speed. Clutch: Rotating ring gear clutch. Brake: Automatic brake integrated in motor bracket. Synthetic Rope: 24m (78.7ft) of 11mm (0.4") high-strength, lightweight UHMWPE. Hook & Thimble: Forged Rope Thimble & MegaPro Hook available in 10 color options. Fairlead: Carbon Offroad MEGAPRO CNC billet, hard-anodized, multi-position precision alloy fairlead. Remotes: Wired remote with 3.6m (11.8ft) lead and wireless remote included, operate from the cab or at the winch. IP Rating: IP68 Rated for dustproof and waterproof protection in harsh conditions. Warranty: Lifetime mechanical warranty, 5-year electrical warranty, and 5-year water ingress protection warranty. Contents 1 x Carbon Scout Pro 15000lb Winch V3 1 x 24m (78.7ft) UHMWPE Synthetic Rope 1 x Forged Rope Thimble & MegaPro Hook 1 x Precision Alloy Fairlead 1 x Wired Remote Control 1 x Wireless Remote Control   Feature Specification Metric (Imperial) Part Number CW-XD15-V3 / CW-XD15-V3WO Rated Line Pull 6804kg (15000lbs) Motor 12V DC 7HP Series-Wound Gear Ratio 218:1 Recommended Battery Minimum 650 CCA Mounting Bolt Pattern 254mm x 114.3mm (10.0" x 4.5") Drum Dimensions (Diameter x Length) 63.5mm x 224mm (2.5" x 8.8") Winch Dimensions (L x W x H) 556.5mm x 158mm x 187mm (21.9" x 6.2" x 7.4") Packing Dimensions (L x W x H) 580mm x 200mm x 220mm (22.8" x 7.9" x 8.7") Installed Weight 26.7kg (58.9lbs) IP Rating IP68   12V DC Performance Specifications (First Layer of Drum) Line Pull Metric (Imperial) Line Speed Metric (Imperial) Motor Current 0kg (0lbs) 8.5m/min (27.9fpm) 65 amps 910kg (2000lbs) 3.6m/min (11.8fpm) 120 amps 2720kg (6000lbs) 2.9m/min (9.5fpm) 160 amps 4540kg (10000lbs) 2.0m/min (6.6fpm) 215 amps 5900kg (13000lbs) 1.4m/min (4.6fpm) 265 amps 6818kg (15000lbs) 1.1m/min (3.6fpm) 380 amps   Pull by Layer Layer Line Pull Metric (Imperial) 1 6810kg (15000lbs) 2 5765kg (12700lbs) 3 4890kg (10770lbs) 4 4145kg (9130lbs)