A 19mm x 9m (3/4" x 29 1/2ft) kinetic recovery rope engineered from premium Nylon66, featuring a 9000kg (19800lbs) minimum breaking strain. Stop shock loading your chassis. Static snatch straps are outdated technology. If you are using a non-stretch strap for a bog recovery, you are transmitting dangerous shock forces directly into your recovery points and chassis rails. The Carbon Offroad 9000kg Kinetic Rope changes the physics of recovery. It turns a potentially dangerous sudden jerk into a smooth, progressive pulling force that pops you out of the bog without the violence. The rubber band effect: Built from premium Nylon66, this rope is engineered to stretch up to 30% under load. It builds up kinetic energy as the recovery vehicle accelerates, then transfers that energy smoothly to the stuck vehicle. No harsh snapping. No whiplash. Just a powerful, controlled pull that does the hard work so your driveline does not have to. Features Engineered for the "Sweet Spot": Specifically for mid-size 4x4s. If a rope is too heavy, it will not stretch; too light, and it risks snapping. This rating is precision-tuned for vehicles in the 2500kg to 3500kg (5511lbs to 7716lbs) class to ensure maximum kinetic energy transfer and safety. Premium Nylon66 Construction: We do not use cheap polyester blends. Nylon66 delivers superior elasticity and memory. It stretches to absorb the shock and returns to its original length after the pull. It is ready for the next bog hole immediately. Urethane Coating: The urethane coating protects the fibres from grit and sand ingress, which kills ropes from the inside out. The woven reflective trace ensures you can see the line tension in your headlights. It keeps your crew safe when things get dark. Contents 1 x Carbon Offroad 9000kg Kinetic Recovery Rope 9m Feature Specification Metric (Imperial) Minimum Breaking Load 9000kg (19800lbs) Dimensions 19mm x 9m (3/4" x 29 1/2ft) Material Nylon66, soft braided with Urethane Armoured Coating Colour Black and blue Elasticity Up to 30% stretch Vehicle Class Rating 2500kg to 3500kg (5511lbs to 7716lbs)

Constructed from 11mm (7/16") UHMWPE rope, this recovery link is strong, light and requires no tools with a minimum breaking strain of 15000kg (33000lbs). Steel shackles are heavy, they fuse shut when you need them most, and if a recovery point fails, that steel shackle becomes a kinetic missile aimed at your windshield. Why risk it? We engineered the Carbon Offroad 15T Synthetic Soft Shackle to replace the metal in your kit. Constructed from 11mm (7/16") UHMWPE rope, which is the same material used in heavy industry lifting. Features 15-Tonne Breaking Strain: It handles a minimum of 15000kg (33000lbs). It is stronger than the steel shackle you are currently using, with none of the weight penalty. Protective Sheath: We wrapped the core in a super heavy-duty tight braided sheath. It takes the abuse, protects the core, and allows you to thread it through standard recovery points without tearing the fibers. The "Monkey Fist" Lock: Our oversized knot design ensures there is zero chance of the shackle slipping or coming apart under load. Reliability is non-negotiable. Zero Seize Technology: Ever needed a hammer to undo a steel shackle after a snatch? Never again. This unloops in seconds, every single time. Contents 1 x Carbon Offroad 15T Synthetic Soft Shackle 1 x Storage Bag Recovery Point Notice Note that you must always ensure your recovery point is smooth because nicks and burrs are the enemy of longevity. Feature Specification Metric (Imperial) Material UHMWPE rope Rope Diameter 11mm (7/16") Length 650mm (25 5/8") Minimum Breaking Strain 15000kg (33000lbs) Colour Blue and black

A complete kinetic and static winch rigging system featuring a 9000kg (19800lbs) kinetic rope, 5m (16ft) all-purpose rope, and four massive 18000kg (39600lbs) soft shackles. Total Mission Capability. You don't get to choose your recovery scenario. You might need to snatch a vehicle out of a bog, or you might need to rig a complex double-line winch pull to get up a rock step. The Carbon Offroad Tactical 4x4 Response Kit is the complete, field-ready system that handles it all. It combines our elite kinetic technology with a full static rigging suite in one heavy-duty MOLLE package. Kinetic Speed. Static Precision. Most kits force you to choose between a snatch strap or winch gear. We give you both. The 9000kg (19800lbs) Kinetic Rope handles the dynamic vehicle-to-vehicle recoveries, while the 5m (16ft) All-Purpose Rope, Winch Ring, and massive 18000kg (39600lbs) Soft Shackles give you the mechanical advantage for technical winching. It is a professional-grade loadout that keeps your profile low and your capability high. Features Complete Rigging Versatility: With four soft shackles and a recovery ring, you have enough gear to set up a double-line pull AND a bridle simultaneously. This allows you to halve the load on your winch while keeping the pull centred on your chassis. 9000kg Kinetic Performance: Ideal for standard 4x4s like the Tacoma, 4Runner and Bronco. The rope stretches to absorb the shock of recovery, protecting your vehicle and mounting points from damage. 5 Metres of Utility: The TAC All Purpose Rope is the unsung hero of this kit. Use it to extend your reach, wrap a large tree, or create an equalising bridle. It connects the dots when standard gear falls short. Stealth & Organization: The MOLLE bag keeps everything organized and can be mounted externally or internally for rapid access. Finished in tactical Olive and Black. What's in the box? 1 × Tactical Response MOLLE Bag 1 × TAC Kinetic Rope: 9000kg (19800lbs) 1 × TAC All Purpose Rope: 5m (16ft) 1 × Winch Recovery Ring: 12500kg (27500lbs), Aluminium 4 × TAC 4X4 Soft Shackle: 18000kg (39600lbs) 1 × Pair of Ultimate Recovery Gloves   Feature Specification Metric (Imperial) Kit Type Kinetic recovery rope and static winch rigging kit Kinetic Rope Rating 9000kg (19800lbs) Kinetic Rope Stretch 30% All Purpose Rope Length 5m (16ft) Winch Recovery Ring Rating 12500kg (27500lbs) Winch Recovery Ring Material Aluminium Soft Shackle Rating 18000kg (39600lbs) Soft Shackles Included 4 Storage Bag Type MOLLE bag Storage Bag Mounting Mounts to cargo barriers or racks Storage Bag Colour Olive and Black Gloves Included 1 Pair Ultimate recovery gloves  

A 10mm x 5m (3/8" x 16 3/8ft) all-purpose recovery rope engineered from 100% UHMWPE, featuring a massive 12000kg (26400lbs) breaking strain. Most utility ropes are weak. They break under real 4x4 loads. We engineered this rope with a massive 12000kg (26400lbs) breaking strain. That means you can trust it with your fully loaded rig in a recovery scenario. It gives you the confidence to bridge the gap between your winch and the anchor without worrying about a catastrophic failure. Features UHMWPE Core Technology: We used the same high tech fibre found in our premium winch ropes. It delivers the strength of steel cable but weighs a fraction of the amount. It is easy to handle. It will not rust or burr like wire. Full Length Protective Sleeve: We armoured the entire length of the rope. This sleeve protects the load bearing core from sharp rocks, abrasive mud, and friction. It ensures your rope lasts for years rather than a single season of hard use. The 5 Metre Solution: At 5m (16 3/8ft), this is the perfect intermediate length. It is ideal for when your winch rope is just that little short. It works perfectly as a bridle for equalising loads across two recovery points. It is the gap filler that saves the day. High Visibility Reflective Weave: You cannot stay safe if you cannot see your gear. We wove reflective fibres through the entire length of the rope. When your headlights hit it, it glows. This keeps your recovery zone defined and prevents accidents in low light. Compact and Lightweight: It rolls up tight. It fits under a seat or in a small recovery bag. It eliminates the need to carry heavy chains or bulky straps for simple towing tasks. Contents 1 x Carbon Offroad 4x4 Vehicle All Purpose Recovery Rope (includes Reinforced Eyelet / Thimble and full length loose protective sleeve) 1 x Velcro strap for storage Feature Specification Metric (Imperial) Material 100% UHMWPE Dimensions 10mm x 5m (3/8" x 16 3/8ft) Breaking Strain 12000kg (26400lbs) Included Hardware Reinforced Eyelet / Thimble, Velcro strap for storage Colour Blue rope, with single black strand, Black soft ends with white logo and full black loose sleeve

A comprehensive 4WD recovery solution featuring a 9000kg (19800lbs) kinetic rope and two 15000kg (33000lbs) soft shackles designed for lighter vehicles and medium-duty recoveries. Reliable recoveries start with the right gear! The Carbon Recovery 9T Kinetic & Soft Shackle Kit is the ultimate solution for safe and efficient 4WD recoveries. Designed for lighter vehicles and medium-duty recoveries, this kit delivers controlled kinetic energy transfer, reducing stress on your vehicle while maximizing pulling power. Whether you're tackling sand, mud, or tough trails, this kit has everything you need to recover safely and with confidence. Made from high-quality Nylon66 double-braided fibers, Its progressive stretch minimizes impact on your vehicle and recovery points, providing safer, more controlled recoveries. The Carbon Offroad Soft Shackles feature a heavy-duty braided sheath and oversized Monkey Fist knot, ensuring superior strength, easy handling, and a secure connection every time. Don't let tough terrain hold you back. Equip your 4WD with the Carbon Recovery 9T Kinetic & Soft Shackle Kit and handle recoveries like a pro. Features Dynamic Kinetic Recovery: The 9000kg (19800lbs) rated Carbon Kinetic Rope provides controlled stretch, reducing shock loads while boosting pulling power. Heavy-Duty Soft Shackles: Two 15000kg (33000lbs) rated Soft Shackles made from ultra-strong UHMWPE with reinforced sheathing for maximum durability. Lighter, Safer Alternative to Steel: Eliminates dangerous metal projectiles in case of failure, making recoveries safer. Compact & Versatile: Perfect for mid-size 4WDs, UTVs, and smaller off-road vehicles, with multiple connection options. Convenient Storage: Includes a Carbon Offroad Gear Bag for easy organization and transport. What's in the box? 1 x Carbon Offroad Kinetic Rope: 9000kg (19800lbs) MBS 2 x Carbon Offroad Soft Shackles: 10mm (3/8") UHMWPE, 15000kg (33000lbs) MBS 1 x Heavy-Duty Gear Bag: Keep your recovery essentials secure and accessible Feature Specification Metric (Imperial) Kinetic Rope Rating (MBS) 9000kg (19800lbs) Kinetic Rope Material Nylon66 double-braided fibers Soft Shackle Rating (MBS) 15000kg (33000lbs) Soft Shackle Diameter 10mm (3/8") Soft Shackle Material UHMWPE

A high-strength UHMWPE winch extension rope designed to instantly add 25m (82ft) of secure reach to your 4x4 recovery setup. Distance is the enemy. Most factory winches hold 28m (91 7/8ft) of rope. But the perfect anchor point is not always that close. When you run out of line, you are not recovering. You are stranded. The Carbon Offroad 4x4 Winch Extension Rope solves the problem instantly. It adds 25m (82ft) to your reach. It turns a failed recovery into an easy exit. Reach the unreachable. This is not just a rope. It is your lifeline to solid ground. It allows you to bypass the scrubby bushes that will rip out of the ground and connect to the solid old growth timber further up the track. It gives you the length to use a snatch block for a double line pull without running out of cable. You get the reach of two winches in one lightweight bag. Features 9000kg (19800lbs) UHMWPE Core: We ditched the heavy wire. This rope uses high strength UHMWPE fibre. It is lighter than water. It is stronger than steel. It handles 9000kg (19800lbs) of force which is perfect for the Tacoma, 4Runner, and Jeep class. High Visibility Reflective Weave: You need to see your line. The reflective detailing glows under headlights. It keeps your extension visible in the mud and the dark so no one drives over it. 25m (82ft) of Freedom: That is 82 feet of extra reach. It effectively doubles the range of your winch. It is the difference between sleeping in the bush and sleeping in your bed. Smart Storage System: Comes with a heavy duty hook and loop fastener. It coils tight. It stows easy. It keeps your kit organised so you are ready to rig in seconds. Contents 1 x Carbon Offroad 4x4 Winch Extension Rope 1 x Heavy duty hook and loop fastener   Feature Specification Metric (Imperial) Material UHMWPE Length 25m (82ft) Capacity / Breaking Strain 9000kg (19800lbs)  

The Carbon 12K is a lightweight, high-performance 12000lb winch designed to handle tough off-road conditions. Engineered in Australia and refined through real-world use. With a powerful 6HP motor, IP68 waterproof rating, and a durable triple planetary gearbox, it’s built for consistent pulling power through mud, sand, and steep terrain. Supplied as a complete kit with everything you need - wired and wireless remotes (both included), synthetic rope, CNC alloy fairlead, isolator switch, and all mounting hardware - it’s ready for installation straight out of the box. The control box offers flexible mounting options, and the multi-fit fairlead ensures compatibility with most bars. Backed by a lifetime mechanical warranty and 5-year electrical and water ingress cover, the Carbon 12K Winch delivers long-term value with no compromises. River crossings and mud runs are stress-free, this winch features a breathable membrane-style motor breather for heat expansion and contraction. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote (both included) from the safety and convenience of your driver’s seat. IP68 meaning - Ingress Protection6 - Can withstand dust and dirt8 - Can be submerged under freshwater for 30 minutes up to 5 ft (1.5 m) depth, but not during operation. The Carbon Winch is a proven performer with year-on-year sales growth and real-world recoveries across some of the toughest terrain in the U.S., including the Rubicon Trail, Sand Hollow, and demanding conditions involving mud, snow, and sand. For peace of mind it’s backed by a class-leading 5-year water ingress & electrical warranty and a lifetime geartrain warranty. If you're capable with a few basic tools, installing a Carbon Winch is easy, with step by step instructions and many extras included to get the job done. We also thought of your safety by including an isolator switch with extra cabling, so when you're not using your winch it's safely turned off and no live power wires are at the front of your vehicle. Mounting the control box is easy with a multi fit system that can either be mounted on the winch, above the winch drum or motor. Or with the bracket can be mounted to the vehicle or on top of your bullbar. As you know, "looks" are a big part of any 4x4 build, so we have included in your winch kit an ultra sexy CNC'd anodized alloy signature Carbon fairlead paired with our own robustly designed hook that makes you stand out from the crowd. Weight is a serious consideration with all 4WD accessories, the Carbon Winch is super lightweight at only 43.0 lb (19.7 kg) Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for a winch user. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches.  Get a winch you can trust.

Built for heavier side-by-sides and utility vehicles, the ATV 4.5K offers 4,500lb capacity and a compact, rugged build. Designed for ATVs, UTVs, side-by-sides, car trailers and equipment transport; this winch is ideal for mounting in the back of a van to help load heavy equipment, and has even been used to load tinnies and open cattle gates on livestock truck trailers. 4,500lb (2,041kg) Rated Pull – Extra capacity for demanding ATV/UTV use 1.9HP Motor – Compact with reliable pulling power 176:1 Gear Ratio – Strong, controlled operation 43ft (13m) Synthetic Rope – Lightweight and durable Mounting Bolt Pattern – 6.57in x 2.99in (167mm x 76mm) Drum Dimensions – 1.26in x 2.87in (32mm x 73mm) Winch Dimensions – 14.92in x 4.72in x 4.53in (379mm x 120mm x 115mm) IP66 Rated winch and solenoid (excludes remote control and switch) Wired + Wireless Remotes – Flexible control options  12V DC PERFORMANCE SPECS (first layer of drum)   Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.) 0  20.4(6.2) 31 Amps 1/4500(2040) 1000 14.2(4.3) 65Amps 2/3750(1700) 2000 10.9(3.3) 96Amps 3/3510(1595) 3000 7.7(2.4) 125Amps 4/3300(1500) 4500 4.9(1.5) 175.Amps          

Carbon Offroad Scout Pro RS Series: Built for Speed The Scout Pro RS Series is designed for winch challenges and high-speed recovery. If you’re looking to minimize recovery time without adding unnecessary weight to your rig, this series provides the highest power-to-weight ratio in its class. The RS Series Breakdown High-Speed Gearing: Equipped with an 8.0HP series-wound motor and an 80:1 gear ratio. This combination is tuned specifically for fast line speeds under load. Weight Optimization: Built on the V3 chassis, the RS series focuses on reducing front-axle weight to maintain vehicle handling and suspension performance. Line Capacity: Comes standard with 42m (137ft) of 8mm Spectra™ Fiber Synthetic UHMWPE rope. This extended length allows for distant anchor points that typically require external extensions. Competition Hardware: Every unit includes the Carbon Offroad MegaPro Hook as standard equipment. The Bottom Line: This is a purpose-built winch for operators who prioritize fast cycle times, extended reach, and weight savings. Combatable with Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Feature Specification (Metric / Imperial) Rated Line Pull 4,080kg (9,000lb) Motor 8.0HP 12V Series-Wound Gear Ratio 80:1 Heavy-Duty Performance Gearing Rope Dimensions 8mm x 42m (5/16" x 137ft) Rope Material Spectra™ Fiber Synthetic UHMWPE Water/Dust Sealing IP68 Rated Winch Dimensions (L x W x H) 572mm x 158mm x 187mm (22.52" x 6.22" x 7.36") Drum Diameter x Length 63mm x 224mm (2.5" x 8.8") Mounting Bolt Pattern 254mm x 114.3mm (10" x 4.5") Chassis Carbon Offroad Version 3 (V3) Included Hardware MegaPro Hook, Fairlead, Wiring Accessory Kit   Line Pull (lbs / kgs) Line Speed (ft/min / m/min) Motor Current (Amps) 0 79.4 ft (24.2 m) 55 A 4000 lbs (1816 kg) 18.4 ft (5.6 m) 180 A 7000 lbs (3180 kg) 13.8 ft (4.2 m) 310 A 9000 lbs (4090 kg) 8.5 ft (2.6 m) 440 A   Layer Rated Line Pull (lbs / kgs) 1 9000 lbs (4090 kg) 2 7760 lbs (3524 kg) 3 6690 lbs (3040 kg) 4 5760 lbs (2615 kg)

The Carbon Offroad Scout Pro RS9-S (Short Drum): Pure Race Power Maximum Muscle. Minimum Footprint. When you’re piloting a race buggy, UTV, or specialized ATV, every millimeter and every gram counts. The Scout Pro RS9-S is the short-drum evolution of our high-speed series—designed specifically for tight spaces where you refuse to compromise on recovery speed or pulling power. The RS9-S Advantage Don’t let the compact size fool you. This is the same 8.0HP powerhouse found in our full-size rigs, shortened down for elite racing applications. With a performance-tuned 80:1 gear ratio, the RS9-S delivers the fastest line speeds in the UTV/Buggy class. Built on our ultra-lightweight chassis, it comes standard with 24m (80ft) of 8mm Spectra™ Fiber synthetic rope. It’s the ultimate "insurance policy" for competitors who need to winch fast, win big, and keep their front end light and flickable. Combatable with Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Feature Specification (Metric / Imperial) Rated Line Pull 4,080kg (9,000lb) Motor 8.0HP 12V Series-Wound Gear Ratio 80:1 Heavy-Duty Performance Gearing Rope Dimensions 8mm x 24m (5/16" x 80ft) Rope Material Spectra™ Fiber Synthetic UHMWPE Water/Dust Sealing IP68 Rated Winch Dimensions (L x W x H) 385mm x 115mm x 120mm (15.16" x 4.53" x 4.7") Drum Diameter x Length 63mm x 122mm (2.5" x 4.8") Mounting Bolt Pattern 164mm x 114.3mm (6.46" x 4.5") Included Hardware MegaPro Hook, Fairlead, Wiring Accessory Kit Winch Weight 22kg (48.4lb)   Line Pull (lbs / kgs) Line Speed (ft/min / m/min) Motor Current (Amps) 0 79.4 ft (24.2 m) 55 A 4000 lbs (1816 kg) 18.4 ft (5.6 m) 180 A 7000 lbs (3180 kg) 13.8 ft (4.2 m) 310 A 9000 lbs (4090 kg) 8.5 ft (2.6 m) 440 A   Layer Rated Line Pull (lbs / kgs) 1 9000 lbs (4090 kg) 2 7760 lbs (3524 kg) 3 6690 lbs (3040 kg) 4 5760 lbs (2615 kg)   Builder & Racer Note The RS9-S features a shortened drum and chassis to fit narrow mounting locations common in race buggies and UTVs. Despite its compact 385mm (15.16 inch) length, it retains the full-sized 8.0HP motor. Ensure your mounting plate or winch cradle is rated for 9,000lb (4,080kg) loads, as this unit packs significantly more punch than standard UTV-class winches.

Looking for a tough, reliable bow shackle? The Carbon Offroad 4.75 Ton Bow Shackle features anti-rattle insulators that let you keep the shackles attached to your recovery points without damaging your expensive bull bar’s paint—or dealing with that annoying rattling noise. Key Features: Crafted from durable C45 steel with a zinc finish and black powder coating for long-lasting protection Anti-rattle insulators protect your bull bar’s paint and eliminate unwanted noise Rated to 4.75 tons (9,500lb / 4,750kg) for heavy-duty recovery tasks

The Carbon 6K packs serious pulling performance into a compact frame, delivering 6,000lb (2,725kg) of capacity with a powerful 2.5HP motor. Perfect for ATVs, UTVs, and light 4x4s tackling farm work, tight forest trails, or deep mud, it’s built for dependable recovery in challenging conditions. 6,000lb (2,725kg) Rated Pull – Serious recovery for ATVs, UTVs, and light 4x4s 2.5HP Motor – Delivers dependable torque in a compact design 147:1 Gear Ratio – Balanced for strength and control 46ft (14m) Synthetic Rope – Lightweight, high-strength UHMWPE Mounting Bolt Pattern – 6.46in x 2.99in (164mm x 76mm) Drum Dimensions – 2.01in x 4.80in (51mm x 122mm) Winch Dimensions – 15.16in x 4.53in x 4.69in (385mm x 115mm x 119mm) IP68 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Versatile control

Carbon Offroad Air Freespool Clutch Upgrade – Suits 12K & Scout Pro Winches Take the hassle out of manual winch operation with the Carbon Offroad Air Freespool Clutch Upgrade. This upgrade replaces the standard manual freespool lever on your Carbon 12K and Scout Pro winches with an air-actuated clutch system. With the push of a button, you can quickly engage or disengage your winch drum. No more leaning over bull bars, climbing under bumpers, or struggling in the mud. By integrating directly into your onboard air system, this upgrade makes recovery faster, easier, and easier to control. Key Features: Air-actuated clutch for effortless freespool engagement and disengagement Compatible with Carbon 12Kv2 onwards & Scout Pro winches. give us a call if you're unsure of your winch model! Quick operation at the touch of a button, perfect for high-pressure recovery situations Durable design built to withstand harsh off-road conditions Increased safety & convenience, no more reaching into awkward or dangerous spaces to operate your winch Included in the kit: Clutch kit Air locking solenoid Airline to suit Fittings to suit Spare O-rings for the internals of the clutch Installation Notes: You’ll need to supply your own switch and wiring, as every setup is different and cannot be universally accounted for. Instructional video coming soon. To install, simply remove the factory gear handle using a 3mm Allen key and a shifter, then fit the air clutch kit in its place. This is the ultimate upgrade for anyone who wants to maximise performance and efficiency from their winch system.

Protect your battery and prevent electrical drain with our high-performance battery isolator switch. Ideal for vehicles and boats, this durable switch offers easy operation and versatile compatibility. Kit Includes: Battery Isolator Switch 4 x mounting bolts with nuts Current & Voltage On/Off 2 positions, 275 A continuous at DC 12V, 455 A intermittent at DC 12V, 1250 A momentary at DC 12V. Simple Operation The switch can be disconnected and reconnected by simply turning the knob and is supplied with bolts. Sturdy Construction The switch is made of ABS plastic housing and solid brass nut, rust-proof, corrosion-resistant, durable, and safe to use. Great Compatibility The battery switch used on DC 12 – 48V systems to isolate and secure the electrical system. Safety Protection The battery switch eliminates any drain on the battery and safely disconnects it when the vehicle or boat is not in use. Specs: Max Current: 275AMax Voltage: 48VSwitch Function: ON-OFFTermination Stud Size: 3/8" (10mm) x 2Operating Temperature: −25°C~85°CHousing Colour: BK-Black

THIS ITEM IS WINCH ONLY The Scout Pro 20K is built for serious recovery on heavy-duty 12V rigs. With 20,000lb of pulling capacity, a 7HP series-wound motor, and a rugged build, it’s made for oversized trailers, expedition trucks, and heavy work vehicles. Whether hauling, rescuing fully loaded 4WDs, or tackling brutal off-road conditions, this winch delivers dependable, uncompromising power. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. 20,000lb (9,072kg) Rated Pull – Maximum capacity for extreme recoveries 7HP Series-Wound Motor – Delivers high torque for confident pulling 354:1 Gear Ratio – Optimized for controlled, powerful winching 82ft (25m) Synthetic Rope – Strong, lightweight, and easy to handle Mounting Bolt Pattern – 10in x 4.5in (254mm x 114.3mm) Drum Dimensions – 3.46in x 8.82in (88mm x 224mm) Winch Dimensions – 22.8in x 7.6in x 8.8in (579mm x 192mm x 224mm) IP68 Rated – Fully sealed against dust and water Wired + Wireless Remotes – Flexible operation options Rotating Ring Gear Clutch – Quick shift between freespool and engaged modes Automatic Load-Holding Brake – Prevents rollback and overheating

Carbon Offroad Long Drum 6K is a nimble workhorse created to reach where short-drum winches can’t. With 6,000lbs of pulling capacity and a generous 26m synthetic rope on its extended drum, the Carbon CW-XD6L is engineered for versatile duty on ATVs, compact 4WDs, caravans, trailers and boats. Do you need to haul a tinny up a steep, low-tide ramp? Slide heavy machinery into a van from well outside the rear doors? Winch a small 4WD or camper-trailer through deep sand without adding an extension rope? If your jobs demand extra line reach in tight spaces, this is the winch you’ve been waiting for. With a sealed permanent-magnet motor, near-silent free-spooling clutch, dual wired + wireless remotes and fail-safe braking, the Long Drum 6K delivers reliable power, precise control and the rope length to keep work sites—and weekend getaways—running smoothly. 6,000lb (2,725kg) Rated Pull – Perfect for marine, trailer, and utility use 2.5HP Motor – Reliable, compact performance 147:1 Gear Ratio – Balanced strength and control 85ft (26m) Synthetic Rope – Extended reach for versatile recovery Mounting Bolt Pattern – 10in x 2.99in (254mm x 76mm) Drum Dimensions – 2.01in x 8.19in (51mm x 208mm) Winch Dimensions – 18.62in x 4.92in x 4.72in (473mm x 125mm x 120mm) IP68 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Multiple control options Please note this kit does not include the winch cradle in the pictures.

The Carbon Offroad Mega Pro Winch Hook is the latest product from the design team at Carbon Offroad. Completely designed, engineered, FEA tested and finished in house by our team, we put all of our collective knowledge and experience together to build a simple, functional and cost effective winch hook which was specifically designed for winching activities.  This is not a hook that is out of the parts bin from the local lifting and rigging supplier, this hook is completely 100% made from scratch by our local design team and overseas manufacturing facility. We did the design, 3d printed the prototypes, tested form, function, fit and usage, FEA process to make the hook as strong as it could be while removing material where it wasn't required.  The I-beam hook construction is unique to the Mega Pro Hook. We cast the alloy gate to make it lightweight and durable. The hook is manufactured by a forging and heat treating process using 40cr material. This material is cost effective, easy to work with and responds well in forging and heat treatment processes. What results is an almost indestructible hook that will last a lifetime. We also then process the finish in a durable powdercoating process, similar to the process that your exterior aluminum windows in your house go through, this process is known for long term resistance to UV degradation and protection of the base material.  This hook can be stowed against the fairlead either flat on both side or on it's end, hook gate up, this gives you the ability to snap on a soft shackle or tree protector loop once handed and walk the rope out to the anchor point.  The mounting pin is a complete through pin design which is externally secured by a circlip making it simple and easy to mount to your winch rope.  We really tried hard here to make this hook to the highest standard at the best price possible so that you and your mates can access good gear for reasonable prices. We did this by committing to a proper design, development and manufacturing process that allows us to keep costs down and get product on the shelf in good quantities.  The hook is safe to use on any winch up to 20000lb.  The rubber pads on the hook are a press to fit arrangement. They have been designed to be removable so that once you have installed the hook, you can arange the logos in a fashion that suits your particular setup. Once in place you can use some rubber cement glue to permanently secure them.   This product is an Australian Registered Design under design number 202116716.  

The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at a minimum breaking strain of 15 tonnes, and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse. The oversized Monkey Fist knot on the Carbon Offroad Soft Shackle ensures there is zero chance of the shackle coming apart during a recovery. The braided heavy duty sheath allows you to go straight through a regular recovery point. However, make sure the recovery point is in good condition, as the shackles can be damaged if the recovery point has nicks and burrs from previous use.  Easy disassembly of the shackle after load is applied is just as easy, if not easier, than a steel shackle. Rope shackles can be used for a number of purposes, such as: Connecting your vehicle to a snatch strap or kinetic rope Connecting a tree trunk protector strap to the winch hook Connecting two straps together to extend your reach They also give you further options, such as using them as an attachment point around a chassis rail or crossmember. The Carbon Offroad Monkey fist Soft Shackle includes a storage bag.

Carbon Offroad Tow Hitch Winch Mounting Cradle Turn your winch into a fully portable recovery tool with this 2-inch (50 mm) tow hitch mount. Perfect for those who want flexibility, it allows you to quickly move your winch between vehicles or store it when not in use. The integrated carry handles fold over the top of the winch for compact, easy storage in your garage, trailer, or truck bed. Compatible with the full Carbon Offroad ATV winch range and all standard low-mount winches except the 20,000lb model. Features & Benefits Portable convenience – easily move your winch from one vehicle to another using a standard 2-inch (50 mm) receiver hitch Quick setup – install or remove your winch in minutes, no permanent mount needed Fold-over carry handles – make lifting and storing your winch simple and space-efficient Heavy-duty construction – built to handle rugged off-road use and heavy pulling power Versatile compatibility – fits all Carbon Offroad ATV winches and all low-mount winches up to 15,000 lb, excluding the 20,000 lb model Ideal for trailers, trucks, and buggies – mount it wherever you have a 2-inch receiver for maximum recovery versatility Disclaimer: Always check your towbar’s rated capacity before use to ensure it is suitable for the weight and load of your winch and recovery operations.

Ultimate Hand Protection The Carbon Offroad Ultimate Recovery Gloves provide maximum comfort and durability, designed to suit large to XL hands with an 80mm to 100mm (3.1" to 3.9") palm width. Want the ultimate in hand protection with a soft, comfortable grip? Get yourself a pair of Carbon Offroad Ultimate Recovery Gloves. Your hands will thank you. Made from modern, durable materials and packed with features for maximum comfort, the Carbon Offroad Ultimate Recovery Gloves are perfect for any recovery task. Protect your hands and look cool doing it. Features Material: Soft, flexible and breathable. Protection: Knuckle rubber protectors. Construction: Double-stitched for durability. Ventilation: Air vents for ventilation. Palm: Extra palm protection and padding. Feel: Soft feel and touch. Fastening: Velcro wrist strap with buckle. Quantity: Sold as a pair. Sizing: Suits large to XL hands. Fit: Suits 80mm to 100mm (3.1" to 3.9") palm width. Contents 1 x Pair of Carbon Offroad Ultimate Recovery Gloves   Feature Specification Metric (Imperial) Size Fit Large to XL Palm Width Fit 80mm - 100mm (3.1" - 3.9") Fastening Type Velcro Wrist Strap  

Carbon Winches Australia – Wired Remote Plug Extension Lead for V2 and V3 Winches  Compatibility: This extension lead is specifically designed for V2 and V3 Carbon Winches. If you’re unsure about fitment, please contact us to confirm. If your control box is tucked away inside your bullbar, or you have an aftermarket bumper such as a GM Fab Bar or Rhino Bar that makes accessing the control box difficult, this wired remote plug extension makes life easier. It allows you to remotely mount the wired remote plug on your bumper or inside your engine bay for quick and hassle-free connection. This simple solution ensures you won’t struggle to plug in your wired controller when you’re out on the trail. Because when the wired remote comes out, the last thing you want is to be fumbling with it while worrying about water flooding your rig. Extension length: Approximately 57 inches (1450 mm)

Got a bar rated to 10K? Stay within spec and retain your warranty with the Carbon Scout Pro XD10. The Carbon Offroad Scout Pro XD10 is a 12V electric recovery winch rated at 10,000 lb, designed for regular off-road recovery work. Part of the Scout Pro Extreme Duty Performance Series, it is intended for vehicles operating in harsh Australian conditions where faster line speed and controlled recovery are required. The Scout Pro 10K is designed for vehicles with bars rated to 10,000 lb, keeping recovery loads within specification while delivering increased line speed for efficient recoveries. You can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Features • 10,000 lb (4,536 kg) rated electric winch• 12V DC operation• 6 HP series-wound electric motor• 180:1 gear ratio• Rotating ring gear clutch• Chrome freespool clutch handle with etched Carbon Offroad logo• Synthetic UHMWPE rope fitted (10 mm x 24 m)• Checker-knurled winch drum• Matte black powder coat finish• 316 stainless steel bolts, nuts, spring washers, and flat washers• IP68 rated dustproof and waterproof construction• Scout Pro Extreme Duty Performance Series construction• Supplied CNC aluminium fairlead Specifications Rated Pull: 10,000 lb (4,536 kg) Motor: 6 HP series-wound Gear Ratio: 180:1 Rope: 78 ft (24 m) synthetic UHMWPE Mounting Bolt Pattern: 10 in x 4.5 in (254 mm x 114.3 mm) Drum Dimensions: 2.50 in x 8.82 in (63.5 mm x 224 mm) Winch Dimensions: 21.1 in x 6.2 in x 7.4 in (535 mm x 158 mm x 187 mm) Control: Wired and wireless remote operation Winch weight with synthetic rope attached: 43.4lb (19.7kg) Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead: 58.8lb (26.65kg) Combatable with Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Contents 1 x Carbon Offroad Scout Pro XD10 10,000 lb Winch1 x Synthetic winch rope (10 mm x 24 m)1 x Winch rope thimble1 x CNC aluminium fairlead1 x Carbon Offroad MegaPro winch hook1 x Winch mounting bolt kit (mounting bolts, nuts, washers, fairlead bolts)1 x Wired remote control1 x Wireless remote control1 x Isolator switch

Heavy-Duty Recovery Power The Carbon Scout Pro 15K bridges the gap between standard 12K winches and truck-grade brutes. With 6804kg (15000lbs) pulling capacity, a 7HP motor, and oversized gearsets, it is built for heavily loaded overland rigs, RAM 1500s, 79 Series Land Cruisers, and slide-on camper haulers that push beyond a 12K's comfort zone. You can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Features Rated Pull: 6804kg (15000lbs) single-line, ideal for RAM 1500, 79 Series, Land Cruiser wagons, and heavy overland rigs. Motor: 12V DC 7HP series-wound motor (24V option available) provides dependable torque for heavy pulls. Gear Train: 3-stage planetary with a 218:1 gear ratio, balanced for strength and line speed. Clutch: Rotating ring gear clutch. Brake: Automatic brake integrated in motor bracket. Synthetic Rope: 24m (78.7ft) of 11mm (0.4") high-strength, lightweight UHMWPE. Hook & Thimble: Forged Rope Thimble & MegaPro Hook available in 10 color options. Fairlead: Carbon Offroad MEGAPRO CNC billet, hard-anodized, multi-position precision alloy fairlead. Remotes: Wired remote with 3.6m (11.8ft) lead and wireless remote included, operate from the cab or at the winch. IP Rating: IP68 Rated for dustproof and waterproof protection in harsh conditions. Warranty: Lifetime mechanical warranty, 5-year electrical warranty, and 5-year water ingress protection warranty. Contents 1 x Carbon Scout Pro 15000lb Winch V3 1 x 24m (78.7ft) UHMWPE Synthetic Rope 1 x Forged Rope Thimble & MegaPro Hook 1 x Precision Alloy Fairlead 1 x Wired Remote Control 1 x Wireless Remote Control   Feature Specification Metric (Imperial) Part Number CW-XD15-V3 / CW-XD15-V3WO Rated Line Pull 6804kg (15000lbs) Motor 12V DC 7HP Series-Wound Gear Ratio 218:1 Recommended Battery Minimum 650 CCA Mounting Bolt Pattern 254mm x 114.3mm (10.0" x 4.5") Drum Dimensions (Diameter x Length) 63.5mm x 224mm (2.5" x 8.8") Winch Dimensions (L x W x H) 556.5mm x 158mm x 187mm (21.9" x 6.2" x 7.4") Packing Dimensions (L x W x H) 580mm x 200mm x 220mm (22.8" x 7.9" x 8.7") Installed Weight 26.7kg (58.9lbs) IP Rating IP68   12V DC Performance Specifications (First Layer of Drum) Line Pull Metric (Imperial) Line Speed Metric (Imperial) Motor Current 0kg (0lbs) 8.5m/min (27.9fpm) 65 amps 910kg (2000lbs) 3.6m/min (11.8fpm) 120 amps 2720kg (6000lbs) 2.9m/min (9.5fpm) 160 amps 4540kg (10000lbs) 2.0m/min (6.6fpm) 215 amps 5900kg (13000lbs) 1.4m/min (4.6fpm) 265 amps 6818kg (15000lbs) 1.1m/min (3.6fpm) 380 amps   Pull by Layer Layer Line Pull Metric (Imperial) 1 6810kg (15000lbs) 2 5765kg (12700lbs) 3 4890kg (10770lbs) 4 4145kg (9130lbs)    

Heavy-Duty Recovery Power The Carbon Scout Pro 15K bridges the gap between standard 12K winches and truck-grade brutes. With 6804kg (15000lbs) pulling capacity, a 7HP motor, and oversized gearsets, it is built for heavily loaded overland rigs, RAM 1500s, 79 Series Land Cruisers, and slide-on camper haulers that push beyond a 12K's comfort zone. You can upgrade this winch with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. Features Rated Pull: 6804kg (15000lbs) single-line, ideal for RAM 1500, 79 Series, Land Cruiser wagons, and heavy overland rigs. Motor: 12V DC 7HP series-wound motor (24V option available) provides dependable torque for heavy pulls. Gear Train: 3-stage planetary with a 218:1 gear ratio, balanced for strength and line speed. Clutch: Rotating ring gear clutch. Brake: Automatic brake integrated in motor bracket. Synthetic Rope: 24m (78.7ft) of 11mm (0.4") high-strength, lightweight UHMWPE. Hook & Thimble: Forged Rope Thimble & MegaPro Hook available in 10 color options. Fairlead: Carbon Offroad MEGAPRO CNC billet, hard-anodized, multi-position precision alloy fairlead. Remotes: Wired remote with 3.6m (11.8ft) lead and wireless remote included, operate from the cab or at the winch. IP Rating: IP68 Rated for dustproof and waterproof protection in harsh conditions. Warranty: Lifetime mechanical warranty, 5-year electrical warranty, and 5-year water ingress protection warranty. Contents 1 x Carbon Offroad Scout Pro 15000lb Winch V3 (WINCH ONLY) 1 x 11mm (0.4") UHMWPE Synthetic Winch Rope   Feature Specification Metric (Imperial) Part Number CW-XD15-V3WO Rated Line Pull 6804kg (15000lbs) Motor 12V DC 7HP Series-Wound Gear Ratio 218:1 Recommended Battery Minimum 650 CCA Mounting Bolt Pattern 254mm x 114.3mm (10.0" x 4.5") Drum Dimensions (Diameter x Length) 63.5mm x 224mm (2.5" x 8.8") Winch Dimensions (L x W x H) 556.5mm x 158mm x 187mm (21.9" x 6.2" x 7.4") Packing Dimensions (L x W x H) 580mm x 200mm x 220mm (22.8" x 7.9" x 8.7") Installed Weight 26.7kg (58.9lbs) IP Rating IP68   12V DC Performance Specifications (First Layer of Drum) Line Pull Metric (Imperial) Line Speed Metric (Imperial) Motor Current 0kg (0lbs) 8.5m/min (27.9fpm) 65 amps 910kg (2000lbs) 3.6m/min (11.8fpm) 120 amps 2720kg (6000lbs) 2.9m/min (9.5fpm) 160 amps 4540kg (10000lbs) 2.0m/min (6.6fpm) 215 amps 5900kg (13000lbs) 1.4m/min (4.6fpm) 265 amps 6818kg (15000lbs) 1.1m/min (3.6fpm) 380 amps   Pull by Layer Layer Line Pull Metric (Imperial) 1 6810kg (15000lbs) 2 5765kg (12700lbs) 3 4890kg (10770lbs) 4 4145kg (9130lbs)  

The Scout Pro 20K is built for serious recovery on heavy-duty 12V rigs. With 20,000lb of pulling capacity, a 7HP series-wound motor, and a rugged build, it’s made for oversized trailers, expedition trucks, and heavy work vehicles. Whether hauling, rescuing fully loaded 4WDs, or tackling brutal off-road conditions, this winch delivers dependable, uncompromising power. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. 20,000lb (9,072kg) Rated Pull – Maximum capacity for extreme recoveries 7HP Series-Wound Motor – Delivers high torque for confident pulling 354:1 Gear Ratio – Optimized for controlled, powerful winching 82ft (25m) Synthetic Rope – Strong, lightweight, and easy to handle Mounting Bolt Pattern – 10in x 4.5in (254mm x 114.3mm) Drum Dimensions – 3.46in x 8.82in (88mm x 224mm) Winch Dimensions – 22.8in x 7.6in x 8.8in (579mm x 192mm x 224mm) IP68 Rated – Fully sealed against dust and water Wired + Wireless Remotes – Flexible operation options Rotating Ring Gear Clutch – Quick shift between freespool and engaged modes Automatic Load-Holding Brake – Prevents rollback and overheating Winch weight with synthetic rope attached – 66.14lb (30kg) Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead – 81.6lb (37kg)

The Scout Pro 20K is built for serious recovery on heavy-duty 24V rigs. With 20,000lb of pulling capacity, a 7HP series-wound motor, and a rugged build, it’s made for oversized trailers, expedition trucks, and heavy work vehicles. Whether hauling, rescuing fully loaded 4WDs, or tackling brutal off-road conditions, this winch delivers dependable, uncompromising power. You can upgrade this winch with with the Carbon Offroad Air Freespool Clutch Upgrade, specifically designed for use with Carbon Offroad 12K and Scout Pro winches. 20,000lb (9,072kg) Rated Pull – Maximum capacity for extreme recoveries 7HP Series-Wound Motor – Delivers high torque for confident pulling 354:1 Gear Ratio – Optimized for controlled, powerful winching 82ft (25m) Synthetic Rope – Strong, lightweight, and easy to handle Mounting Bolt Pattern – 10in x 4.5in (254mm x 114.3mm) Drum Dimensions – 3.46in x 8.82in (88mm x 224mm) Winch Dimensions – 22.8in x 7.6in x 8.8in (579mm x 192mm x 224mm) IP68 Rated – Fully sealed against dust and water Wired + Wireless Remotes – Flexible operation options Rotating Ring Gear Clutch – Quick shift between freespool and engaged modes Automatic Load-Holding Brake – Prevents rollback and overheating Winch weight with synthetic rope attached – 66.14lb (30kg) Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead – 81.6lb (37kg)

The Carbon Offroad TANK 20000lb electric winch is a force to be reckoned with.    A new generation of winches joins the Carbon Offroad line up. TANK is synonymous for indestructible, bulletproof and powerful, which is just what this winch is. TANK is also associated with heavy, which is something this winch is not!  We understand that building the ultimate offroad rig often requires a lot of time, effort and additional parts once it comes off the factory floor, and this all adds weight. The capability to self recover a vehicle is generally high on the list of priorities for most overlanding and touring journey people, as most of the time, solo travel is the reality. In the past, this generally required a winch with steel cable and a heavy steel bullbar to carry it, but in todays market, there are smarter options and this includes the winches. Yes you can still buy a cheap heavy winch made from castings of solid steel if you like that sort of thing, but technology has improved, materials have improved and this has led to a winch being designed and built like the TANK. Billet alloys machined on CNC mills, alloy castings make up the gearbox housings and main frames of the winch, critical components such as the winch drum are still made from steel, but this winch also features an aesthetic quality that is almost unmatched in the market. If you truly appreciate good design, the TANK will impress with it's sexy lines, solid cast alloy control box and solid alloy fairlead.  One of the most notable requirements of modern winches is that a winch must be waterproof. The TANK winch features a system unseen before in the winch market. The winch motor and drum frame mount are assembled as one unit at the factory, then it undergoes real life pressure leak testing to 20PSI on a custom made jig specially designed for this test, simulating the same pressure as a depth of 14 metres underwater!  It must pass this test before moving further down the assembly line. We guarantee this winch will not see water out of the box.  Aside from the motor side, the gearbox housing also features a two stage mechanical and rubber o-ring sealing system which will ensure that part of the winch is also 100% sealed from water ingress to IP69K levels.  Other functions of the winch remain similar to our other winches, utilising a rotating ring gear free spool clutch assembly, 4 stage planetary gear train made from solid cut and hardened gear steel, with the gear train being oversize and similar to our Scout Pro Extreme Duty winches. It also features a gear train connected braking system which mitigates any heat build up on the drum which could cause damage to the winch rope.  The control box can be mounted over the drum directly into the threaded holes in the tie bars or over the motor with supplied mounting brackets, it can also be mounted remotely flush onto a bar or there is an optional remote mounting bracket available separately.  The Tank 20000lb come in both 12 volt and 24 volt configurations allowing fitment on large 4x4s through to trucks running 24 volt systems. With a single line pull capacity over 9 tonne, you can be sure this winch will perform when no other option exists to extract your vehicle from a sticky situation.    What is in the box:  1 x Tank winch with synthetic rope 1 x control box kit complete with cables 1 x battery earth cable 1 x 2 in 1 wireless remote control with plug in cable backup 1 x Alloy fairlead - standard offset 1 x Forged Alloy hook with mounting pin and split pin 1 x Mounting Bolt kit including separate fairlead mounting bolts 1 x control box "over motor" mounting bracket pair 1 x bolt kit for control box mounting 1 x rotary battery isolator switch 1 x battery isolator connecting cable 30cm 1 x battery isolator mounting bracket 1 x hook safety strap 1 x instruction manual    Specifications:  Rated Pulling Power: 20,000lb (9072kg) Power: 12V DC or 24V DC (separate website listings)  Motor: 7.8HP Series Wound intermittent duty cycle Cabling: 25mm2 conduited cable with terminated lugs Hand Control: 2 in 1 rechargeable wireless or plug in wired loom -(spare battery included) IP Rating: IP68 - Motor unit pressure tested to 20psi Hook: High strength forged alloy wide gate hook Control box: Premium Cast alloy compact design for over motor or over drum fitment with 600amp solenoid and inbuilt wireless receiver.  Isolator: Heavy duty marine rotary style isolator with mounting bracket Winch Housing: Cast and precision machined alloy Gear Train: 440:1 Ratio 4 stage planetary gearset Clutch: Rotating ring gear clutch - easy engagement and disengagement Synthetic rope: 21m of 14mm diameter UHMWPE fibre Mounting bolt pattern: industry standard 254mm x 114.3mm (10 x 4.5 inch)  Drum Diameter: 88mm Battery: 650CCA minimum vehicle battery size for winching.  Weight:  Shipping Carton Weight: 37KG As fitted to vehicle:  33.4kg   Rated Line Pull: 1st layer of drum: 20000lb (9072kg) / Between 16-21m rope out 2nd layer of drum: 16216lb (7371kg) / Between 11-16m rope out 3rd layer of drum: 13636lb (6198kg) / Between 1-11m rope out   Line pull 0kg Speed: 16.4ft/min - 5m/min Amp Draw: 85 amp Line pull 6000lb / 2721kg Speed: 7.4ft/min - 2.25m/min Amp Draw: 185 amp Line pull 10000lb / 4563kg Speed: 5.1ft/min - 1.55m/min Amp Draw: 275 amp Line pull 15000lb / 6803kg Speed: 3.3ft/min - 1.0m/min Amp Draw: 425 amp Line pull 20000lb / 9072kg Speed: 2.62ft/min - 0.8m/min Amp Draw: 430 amp   Warranty is Limited Lifetime Geartrain / 5 Year Electrical. Designed for Australian and international conditions. 5 Year Water Ingress Protection Warranty

This bracket kit provides a clean and secure under-hood installation for the V2/V3 remote wired remote plug extension, compatible with the Carbon 12k V3 Winch and Scout Pro Winch range. Includes: 1 x stainless steel L-shaped bracket 2 x M4 stainless steel bolts and nylock nuts