The Carbon 6K packs serious pulling performance into a compact frame, delivering 6,000lb (2,725kg) of capacity with a powerful 2.5HP motor. Perfect for ATVs, UTVs, and light 4x4s tackling farm work, tight forest trails, or deep mud, it’s built for dependable recovery in challenging conditions. 6,000lb (2,725kg) Rated Pull – Serious recovery for ATVs, UTVs, and light 4x4s 2.5HP Motor – Delivers dependable torque in a compact design 147:1 Gear Ratio – Balanced for strength and control 46ft (14m) Synthetic Rope – Lightweight, high-strength UHMWPE Mounting Bolt Pattern – 6.46in x 2.99in (164mm x 76mm) Drum Dimensions – 2.01in x 4.80in (51mm x 122mm) Winch Dimensions – 15.16in x 4.53in x 4.69in (385mm x 115mm x 119mm) IP66 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Versatile control

Carbon Offroad Long Drum 6K is a nimble workhorse created to reach where short-drum winches can’t. With 6,000lbs of pulling capacity and a generous 26m synthetic rope on its extended drum, the Carbon CW-XD6L is engineered for versatile duty on ATVs, compact 4WDs, caravans, trailers and boats. Do you need to haul a tinny up a steep, low-tide ramp? Slide heavy machinery into a van from well outside the rear doors? Winch a small 4WD or camper-trailer through deep sand without adding an extension rope? If your jobs demand extra line reach in tight spaces, this is the winch you’ve been waiting for. With a sealed permanent-magnet motor, near-silent free-spooling clutch, dual wired + wireless remotes and fail-safe braking, the Long Drum 6K delivers reliable power, precise control and the rope length to keep work sites—and weekend getaways—running smoothly. 6,000lb (2,725kg) Rated Pull – Perfect for marine, trailer, and utility use 2.5HP Motor – Reliable, compact performance 147:1 Gear Ratio – Balanced strength and control 85ft (26m) Synthetic Rope – Extended reach for versatile recovery Mounting Bolt Pattern – 10in x 2.99in (254mm x 76mm) Drum Dimensions – 2.01in x 8.19in (51mm x 208mm) Winch Dimensions – 18.62in x 4.92in x 4.72in (473mm x 125mm x 120mm) IP66 Rated winch and solenoid (excludes remote control and switch) Handlebar Mini-Rocker + Wireless Remote – Multiple control options Please note this kit does not include the winch cradle in the pictures.

Built for heavier side-by-sides and utility vehicles, the ATV 4.5K offers 4,500lb capacity and a compact, rugged build. Designed for ATVs, UTVs, side-by-sides, car trailers and equipment transport; this winch is ideal for mounting in the back of a van to help load heavy equipment, and has even been used to load tinnies and open cattle gates on livestock truck trailers. 4,500lb (2,041kg) Rated Pull – Extra capacity for demanding ATV/UTV use 1.9HP Motor – Compact with reliable pulling power 176:1 Gear Ratio – Strong, controlled operation 43ft (13m) Synthetic Rope – Lightweight and durable Mounting Bolt Pattern – 6.57in x 2.99in (167mm x 76mm) Drum Dimensions – 1.26in x 2.87in (32mm x 73mm) Winch Dimensions – 14.92in x 4.72in x 4.53in (379mm x 120mm x 115mm) IP66 Rated winch and solenoid (excludes remote control and switch) Wired + Wireless Remotes – Flexible control options  12V DC PERFORMANCE SPECS (first layer of drum)   Line Pull Lbs.(Kgs.) Line Speed FT./min(M/min.) MotorCurrent Pull by layerlayer/Lbs(Kgs.) 0  20.4(6.2) 31 Amps 1/4500(2040) 1000 14.2(4.3) 65Amps 2/3750(1700) 2000 10.9(3.3) 96Amps 3/3510(1595) 3000 7.7(2.4) 125Amps 4/3300(1500) 4500 4.9(1.5) 175.Amps          

The Carbon 12K is a lightweight, high-performance 12000lb winch designed to handle tough off-road conditions. Engineered in Australia and refined through real-world use. With a powerful 6.2HP motor, IP68 waterproof rating, and a durable triple planetary gearbox, it’s built for consistent pulling power through mud, sand, and steep terrain. Supplied as a complete kit with everything you need - wired and wireless remotes (both included), synthetic rope, CNC alloy fairlead, isolator switch, and all mounting hardware - it’s ready for installation straight out of the box. The control box offers flexible mounting options, and the multi-fit fairlead ensures compatibility with most bars. Backed by a lifetime mechanical warranty and 5-year electrical and water ingress cover, the Carbon 12K Winch delivers long-term value with no compromises. River crossings and mud runs are stress-free. This winch features a breathable membrane-style motor breather for heat expansion and contraction. The Carbon Winch gets your recovery done with ease by using the wireless or wired remote (both included) from the safety and convenience of your driver's seat. IP68 meaning - Ingress Protection6 - Can withstand dust and dirt8 - Can be submerged under freshwater for 30 minutes up to 5' depth, but not during operation. The Carbon Winch is a proven performer with year on year sales growth and countless recoveries from the mud bogs of Tassie to the river crossings of the Cape. For peace of mind it's backed here in Australia by a class leading 5 year water ingress & electrical warranty and a lifetime geartrain warranty. We also stock a warehouse of replacement parts here in Australia to get you back winching if the need arises. If you're capable with a few basic tools, installing a Carbon Winch is easy, with step by step instructions and many extras included to get the job done. We also thought of your safety by including an isolator switch with extra cabling, so when you're not using your winch it's safely turned off and no live power wires are at the front of your vehicle. Mounting the control box is easy with a multi fit system that can either be mounted on the winch, above the winch drum or motor. Or with the bracket can be mounted to the vehicle or on top of your bullbar. As you know, "looks" are a big part of any 4x4 build, so we have included in your winch kit an ultra sexy CNC'd anodised alloy signature Carbon fairlead paired with our own robust designed hook that makes you stand out from the crowd. Weight is a serious consideration with all 4wd accessories, the Carbon Winch is super lightweight at only 55lb Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for a winch user. Get a winch you can trust.

The Carbon Offroad TANK 20000lb electric winch is a force to be reckoned with.  A new generation of winches joins the Carbon Offroad line up. TANK is synonymous for indestructible, bulletproof and powerful, which is just what this winch is. TANK is also associated with heavy, which is something this winch is not!  We understand that building the ultimate offroad rig often requires a lot of time, effort and additional parts once it comes off the factory floor, and this all adds weight. The capability to self recover a vehicle is generally high on the list of priorities for most overlanding and touring journey people, as most of the time, solo travel is the reality. In the past, this generally required a winch with steel cable and a heavy steel bullbar to carry it, but in todays market, there are smarter options and this includes the winches. Yes you can still buy a cheap heavy winch made from castings of solid steel if you like that sort of thing, but technology has improved, materials have improved and this has led to a winch being designed and built like the TANK. Billet alloys machined on CNC mills, alloy castings make up the gearbox housings and main frames of the winch, critical components such as the winch drum are still made from steel, but this winch also features an aesthetic quality that is almost unmatched in the market. If you truly appreciate good design, the TANK will impress with it's sexy lines, solid cast alloy control box and solid alloy fairlead.  One of the most notable requirements of modern winches is that a winch must be waterproof. The TANK winch features a system unseen before in the winch market. The winch motor and drum frame mount are assembled as one unit at the factory, then it undergoes real life pressure leak testing to 20PSI on a custom made jig specially designed for this test, simulating the same pressure as a depth of 14 metres underwater!  It must pass this test before moving further down the assembly line. We guarantee this winch will not see water out of the box.  Aside from the motor side, the gearbox housing also features a two stage mechanical and rubber o-ring sealing system which will ensure that part of the winch is also 100% sealed from water ingress to IP69K levels.  Other functions of the winch remain similar to our other winches, utilising a rotating ring gear free spool clutch assembly, 4 stage planetary gear train made from solid cut and hardened gear steel, with the gear train being oversize and similar to our Scout Pro Extreme Duty winches. It also features a gear train connected braking system which mitigates any heat build up on the drum which could cause damage to the winch rope.  The control box can be mounted over the drum directly into the threaded holes in the tie bars or over the motor with supplied mounting brackets, it can also be mounted remotely flush onto a bar or there is an optional remote mounting bracket available separately.  The Tank 20000lb come in both 12 volt and 24 volt configurations allowing fitment on large 4x4s through to trucks running 24 volt systems. With a single line pull capacity over 9 tonne, you can be sure this winch will perform when no other option exists to extract your vehicle from a sticky situation.    What is in the box:  1 x Tank winch with synthetic rope 1 x control box kit complete with cables 1 x battery earth cable 1 x 2 in 1 wireless remote control with plug in cable backup 1 x Alloy fairlead - standard offset 1 x Forged Alloy hook with mounting pin and split pin 1 x Mounting Bolt kit including separate fairlead mounting bolts 1 x control box "over motor" mounting bracket pair 1 x bolt kit for control box mounting 1 x rotary battery isolator switch 1 x battery isolator connecting cable 30cm 1 x battery isolator mounting bracket 1 x hook safety strap 1 x instruction manual    Specifications:  Rated Pulling Power: 20,000lb (9072kg) Power: 12V DC or 24V DC (separate website listings)  Motor: 7.8HP Series Wound intermittent duty cycle Cabling: 25mm2 conduited cable with terminated lugs Hand Control: 2 in 1 rechargeable wireless or plug in wired loom -(spare battery included) IP Rating: IP68 - Motor unit pressure tested to 20psi Hook: High strength forged alloy wide gate hook Control box: Premium Cast alloy compact design for over motor or over drum fitment with 600amp solenoid and inbuilt wireless receiver.  Isolator: Heavy duty marine rotary style isolator with mounting bracket Winch Housing: Cast and precision machined alloy Gear Train: 440:1 Ratio 4 stage planetary gearset Clutch: Rotating ring gear clutch - easy engagement and disengagement Synthetic rope: 21m of 14mm diameter UHMWPE fibre Mounting bolt pattern: industry standard 254mm x 114.3mm (10 x 4.5 inch)  Drum Diameter: 88mm Battery: 650CCA minimum vehicle battery size for winching.  Weight:  Shipping Carton Weight: 37KG As fitted to vehicle:  33.4kg   Rated Line Pull: 1st layer of drum: 20000lb (9072kg) / Between 16-21m rope out 2nd layer of drum: 16216lb (7371kg) / Between 11-16m rope out 3rd layer of drum: 13636lb (6198kg) / Between 1-11m rope out   Line pull 0kg Speed: 16.4ft/min - 5m/min Amp Draw: 85 amp Line pull 6000lb / 2721kg Speed: 7.4ft/min - 2.25m/min Amp Draw: 185 amp Line pull 10000lb / 4563kg Speed: 5.1ft/min - 1.55m/min Amp Draw: 275 amp Line pull 15000lb / 6803kg Speed: 3.3ft/min - 1.0m/min Amp Draw: 425 amp Line pull 20000lb / 9072kg Speed: 2.62ft/min - 0.8m/min Amp Draw: 430 amp   Warranty is Limited Lifetime Geartrain / 5 Year Electrical. Designed for Australian and international conditions. 

The Carbon Offroad TANK 20000lb electric winch is a force to be reckoned with.    A new generation of winches joins the Carbon Offroad line up. TANK is synonymous for indestructible, bulletproof and powerful, which is just what this winch is. TANK is also associated with heavy, which is something this winch is not!  We understand that building the ultimate offroad rig often requires a lot of time, effort and additional parts once it comes off the factory floor, and this all adds weight. The capability to self recover a vehicle is generally high on the list of priorities for most overlanding and touring journey people, as most of the time, solo travel is the reality. In the past, this generally required a winch with steel cable and a heavy steel bullbar to carry it, but in todays market, there are smarter options and this includes the winches. Yes you can still buy a cheap heavy winch made from castings of solid steel if you like that sort of thing, but technology has improved, materials have improved and this has led to a winch being designed and built like the TANK. Billet alloys machined on CNC mills, alloy castings make up the gearbox housings and main frames of the winch, critical components such as the winch drum are still made from steel, but this winch also features an aesthetic quality that is almost unmatched in the market. If you truly appreciate good design, the TANK will impress with it's sexy lines, solid cast alloy control box and solid alloy fairlead.  One of the most notable requirements of modern winches is that a winch must be waterproof. The TANK winch features a system unseen before in the winch market. The winch motor and drum frame mount are assembled as one unit at the factory, then it undergoes real life pressure leak testing to 20PSI on a custom made jig specially designed for this test, simulating the same pressure as a depth of 14 metres underwater!  It must pass this test before moving further down the assembly line. We guarantee this winch will not see water out of the box.  Aside from the motor side, the gearbox housing also features a two stage mechanical and rubber o-ring sealing system which will ensure that part of the winch is also 100% sealed from water ingress to IP69K levels.  Other functions of the winch remain similar to our other winches, utilising a rotating ring gear free spool clutch assembly, 4 stage planetary gear train made from solid cut and hardened gear steel, with the gear train being oversize and similar to our Scout Pro Extreme Duty winches. It also features a gear train connected braking system which mitigates any heat build up on the drum which could cause damage to the winch rope.  The control box can be mounted over the drum directly into the threaded holes in the tie bars or over the motor with supplied mounting brackets, it can also be mounted remotely flush onto a bar or there is an optional remote mounting bracket available separately.  The Tank 20000lb come in both 12 volt and 24 volt configurations allowing fitment on large 4x4s through to trucks running 24 volt systems. With a single line pull capacity over 9 tonne, you can be sure this winch will perform when no other option exists to extract your vehicle from a sticky situation.    What is in the box:  1 x Tank winch with synthetic rope 1 x control box kit complete with cables 1 x battery earth cable 1 x 2 in 1 wireless remote control with plug in cable backup 1 x Alloy fairlead - standard offset 1 x Forged Alloy hook with mounting pin and split pin 1 x Mounting Bolt kit including separate fairlead mounting bolts 1 x control box "over motor" mounting bracket pair 1 x bolt kit for control box mounting 1 x rotary battery isolator switch 1 x battery isolator connecting cable 30cm 1 x battery isolator mounting bracket 1 x hook safety strap 1 x instruction manual    Specifications:  Rated Pulling Power: 20,000lb (9072kg) Power: 12V DC or 24V DC (separate website listings)  Motor: 7.8HP Series Wound intermittent duty cycle Cabling: 25mm2 conduited cable with terminated lugs Hand Control: 2 in 1 rechargeable wireless or plug in wired loom -(spare battery included) IP Rating: IP68 - Motor unit pressure tested to 20psi Hook: High strength forged alloy wide gate hook Control box: Premium Cast alloy compact design for over motor or over drum fitment with 600amp solenoid and inbuilt wireless receiver.  Isolator: Heavy duty marine rotary style isolator with mounting bracket Winch Housing: Cast and precision machined alloy Gear Train: 440:1 Ratio 4 stage planetary gearset Clutch: Rotating ring gear clutch - easy engagement and disengagement Synthetic rope: 21m of 14mm diameter UHMWPE fibre Mounting bolt pattern: industry standard 254mm x 114.3mm (10 x 4.5 inch)  Drum Diameter: 88mm Battery: 650CCA minimum vehicle battery size for winching.  Weight:  Shipping Carton Weight: 37KG As fitted to vehicle:  33.4kg   Rated Line Pull: 1st layer of drum: 20000lb (9072kg) / Between 16-21m rope out 2nd layer of drum: 16216lb (7371kg) / Between 11-16m rope out 3rd layer of drum: 13636lb (6198kg) / Between 1-11m rope out   Line pull 0kg Speed: 16.4ft/min - 5m/min Amp Draw: 85 amp Line pull 6000lb / 2721kg Speed: 7.4ft/min - 2.25m/min Amp Draw: 185 amp Line pull 10000lb / 4563kg Speed: 5.1ft/min - 1.55m/min Amp Draw: 275 amp Line pull 15000lb / 6803kg Speed: 3.3ft/min - 1.0m/min Amp Draw: 425 amp Line pull 20000lb / 9072kg Speed: 2.62ft/min - 0.8m/min Amp Draw: 430 amp   Warranty is Limited Lifetime Geartrain / 5 Year Electrical. Designed for Australian and international conditions. 5 Year Water Ingress Protection Warranty

The Carbon Offroad Mega Pro Winch Hook is the latest product from the design team at Carbon Offroad. Completely designed, engineered, FEA tested and finished in house by our team, we put all of our collective knowledge and experience together to build a simple, functional and cost effective winch hook which was specifically designed for winching activities.  This is not a hook that is out of the parts bin from the local lifting and rigging supplier, this hook is completely 100% made from scratch by our local design team and overseas manufacturing facility. We did the design, 3d printed the prototypes, tested form, function, fit and usage, FEA process to make the hook as strong as it could be while removing material where it wasn't required.  The I-beam hook construction is unique to the Mega Pro Hook. We cast the alloy gate to make it lightweight and durable. The hook is manufactured by a forging and heat treating process using 40cr material. This material is cost effective, easy to work with and responds well in forging and heat treatment processes. What results is an almost indestructible hook that will last a lifetime. We also then process the finish in a durable powdercoating process, similar to the process that your exterior aluminum windows in your house go through, this process is known for long term resistance to UV degradation and protection of the base material.  This hook can be stowed against the fairlead either flat on both side or on it's end, hook gate up, this gives you the ability to snap on a soft shackle or tree protector loop once handed and walk the rope out to the anchor point.  The mounting pin is a complete through pin design which is externally secured by a circlip making it simple and easy to mount to your winch rope.  We really tried hard here to make this hook to the highest standard at the best price possible so that you and your mates can access good gear for reasonable prices. We did this by committing to a proper design, development and manufacturing process that allows us to keep costs down and get product on the shelf in good quantities.  The hook is safe to use on any winch up to 20000lb.  The rubber pads on the hook are a press to fit arrangement. They have been designed to be removable so that once you have installed the hook, you can arange the logos in a fashion that suits your particular setup. Once in place you can use some rubber cement glue to permanently secure them.   This product is an Australian Registered Design under design number 202116716.  

The Carbon Offroad MegaPro Tow Hitch Receiver Recovery Point is a premium, versatile recovery solution designed to fit various 50mm receiver hitches. Its adjustable mounting options cater to both shallow and deep-style hitches, ensuring compatibility with a wide range of vehicles. Crafted from high-grade 6061 T6 aluminium and precision CNC machined, this recovery point boasts a durable and aesthetically pleasing finish. The Type 3 hard anodized coating provides exceptional corrosion resistance for long-lasting performance. At a mere 1.2kg, it's significantly lighter than many comparable options on the market. The MegaPro Hitch features a smooth-edged shackle mount, designed for safe use with synthetic rope soft shackles. It can also accommodate a Carbon Offroad 4.25T Bow Shackle, offering flexibility in attachment methods. Mounting Options and Versatility When using the MegaPro Hitch, you can choose between horizontal and vertical shackle point orientations. This flexibility allows for optimal recovery scenarios, regardless of the vehicle's position or the angle of pull. Upward-facing shackle point: Enables lateral movement, ideal for situations where the recovering vehicle is not directly in front of the one being recovered. Sideways-facing shackle point: Allows for vertical movement, accommodating recoveries on inclines or declines. Testing and Durability The MegaPro Hitch underwent rigorous Nata-accredited testing by Mechtest in Brisbane, Australia. While the mounting pin failed at nearly 20 tonnes, the recovery point itself remained intact, demonstrating exceptional strength and durability. The only damage sustained was a slight deformation to the hitch due to the bent pin.

The Carbon Offroad Essential Snatch and Winch 4x4 Recovery Kit is designed to equip the 4x4 operator with the necessary essential recovery products to safely perform two major tasks in safe vehicle recovery. Firstly, for snatch or tow recovery, the kit is equipped with an 8000kg x 9 meter long snatch strap, along with the included steel D-shackles and synthetic leather gloves for the user allowing safe connection to the vehicle being recovered and the vehicle conducting the tow recovery. Secondly, for winch recovery, the operator can safely perform both a single line and a double line pull with the tree trunk protector strap, D-shackles, snatch block, and gloves. This kit configuration is unique on the market, as no other brand offers such a comprehensive all-in-one package. Bag Features: 500 denier ripstop oxford canvas material Heavy duty webbing straps Heavy duty zipper closure Internal pockets for snatch block and D-shackles Sleeves under lid for gloves storage Contents 1 x Recovery Bag 2 x Carbon Offroad Monkey Fist 15T Synthetic Soft Shackle 1 x Carbon Offroad 8 Tonne x 9 Meter Snatch Strap 2 x Carbon Offroad Bow Shackle 1 x 10T Recovery Ring 1 x Pair of Carbon Offroad Ultimate Recovery Gloves 1 x 12T 5m Tree Trunk Protector Strap

The Carbon Offroad Monkey Fist Soft Shackle is an absolute winner! The 10mm UHMWPE rope is rated at a minimum breaking strain of 15 tonnes, and with a super heavy duty braided tight sheath over the core, this shackle is built to take some abuse. The oversized Monkey Fist knot on the Carbon Offroad Soft Shackle ensures there is zero chance of the shackle coming apart during a recovery. The braided heavy duty sheath allows you to go straight through a regular recovery point. However, make sure the recovery point is in good condition, as the shackles can be damaged if the recovery point has nicks and burrs from previous use.  Easy disassembly of the shackle after load is applied is just as easy, if not easier, than a steel shackle. Rope shackles can be used for a number of purposes, such as: Connecting your vehicle to a snatch strap or kinetic rope Connecting a tree trunk protector strap to the winch hook Connecting two straps together to extend your reach They also give you further options, such as using them as an attachment point around a chassis rail or crossmember. The Carbon Offroad Monkey fist Soft Shackle includes a storage bag.

The Monkey Fist Solid Recovery Ring: A Must-Have for Enhanced Recovery Efficiency Elevate your offroad recovery capabilities with the Monkey Fist Solid Recovery Ring, a premium addition to the Carbon Offroad line of lightweight and durable recovery gear. Designed to work seamlessly with the Monkey Fist Soft Shackle, this solid billet 6061 T6 aluminium recovery ring allows you to set up a double line pull with your synthetic rope electric winch, significantly increasing your recovery capacity. Featuring laser branding (not embossed, CNCed, or stamped branding, which could affect the operation of the ring against the soft shackle) and a low-friction, anodized finish, this solid recovery ring will provide years of trouble free double line pulls. Key Features: Rated to 22,000lb (10,000kg) Solid billet 6061 T6 aluminium construction Compatible with Monkey Fist soft shackle Enables double line pulls for increased recovery capacity Low friction anodized finish for smooth operation

Looking for a tough, reliable bow shackle? The Carbon Offroad 4.75 Ton Bow Shackle features anti-rattle insulators that let you keep the shackles attached to your recovery points without damaging your expensive bull bar’s paint—or dealing with that annoying rattling noise. Key Features: Crafted from durable C45 steel with a zinc finish and black powder coating for long-lasting protection Anti-rattle insulators protect your bull bar’s paint and eliminate unwanted noise Rated to 4.75 tons (9,500lb / 4,750kg) for heavy-duty recovery tasks